·
·
·
·
·
·
·
·
·
·
·
·
|
order online now
we acceptor call
800.456.9266 |
Mailing Address
New Nycon, Inc.
12 Canal Street, Ste. 102
Westerly RI, 02891-2407
Phone
401.596.3955
Toll-Free
800.456.9266
Fax
401.596.4242
Email
nycon@nycon.com
|
|
|
your applications
Shotcrete
Mortar or concrete pneumatically projected at high velocity onto a surface, shotcrete is typically used for applications in difficult-to-access or remote locations.
A major benefit of Nycon synthetic fibers in shotcrete is the reduction of rebound or material lost from the receiving face and the elimination of secondary reinforcing mesh. Some uses include: artificial rockscapes, liners to tunnels, shafts, swimming pools and irrigation channels, retaining walls, repairs to deteriorated buildings, slope stabilization, marine and bridge structures, etc.
The following Nycon fibers are suitable for and recommended for shotcrete applications:
Dry-mix:NyconSF: Either drawn-wire or slit-sheet steel, NyconSF fibers meet the requirements of ASTM A820 for use as secondary reinforcement and are an effective enhancement of flexural strength.
NyconB: A combination of Nycon's steel and synthetic fibers wherein the synthetic fibers strengthen the bond between of the steel fibers in the mortar matrix to increase the effectiveness of the steel fibers.
NyconXL: High-dosage synthetic fibers for secondary reinforcement that enhance the structural integrity of concrete and shotcrete. They help reduce the potential of catastrophic failure and are ideal for impact and seismic-resistant applications.
ConTrol2000: Nycon's premium nylon reinforcing fiber for use with traditional stucco, one-coat stucco, shotcrete applications, repair mortars, and pre-blended products.
ConTrol+: An ideal reinforcement for architectural, ornamental, and colorized concrete applications.
AR Glass Fibers: Nycon AR (alkali-resistant) glass fibers enhance the lifespan and serviceability of concrete flatwork, precast products, architectural/decorative surfaces, and ornamental cementitious products.
Wet-mix:
NyconSF: Either drawn-wire or slit-sheet steel, NyconSF fibers meet the requirements of ASTM A820 for use as secondary reinforcement and are an effective enhancement of flexural strength.
NyconB: A combination of Nycon's steel and synthetic fibers wherein the synthetic fibers strengthen the bond between of the steel fibers in the mortar matrix to increase the effectiveness of the steel fibers.
NyconXL: High-dosage synthetic fibers for secondary reinforcement that enhance the structural integrity of concrete and shotcrete. They help reduce the potential of catastrophic failure and are ideal for impact and seismic-resistant applications.
NyconRC: Nycon's top-of-the-line, nylon fiber for excellent secondary reinforcement in concrete applications. Because of the exceptional bond between matrix and fiber, they yield the best results for concrete durability and have the highest UL fire-resistance rating of all synthetic fibers.
MultiMesh: An economical nylon fiber solution for ready-mix concrete that provides excellent secondary reinforcing results for plastic-shrinkage crack control and increased impact resistance.
ProConM: A cost-effective polypropylene monofilament fiber for ready-mix concrete to manage plastic-shrinkage cracking.
ProConF: A polypropylene fibrillated fiber for ready-mix concrete, an effective first-choice fiber for secondary reinforcement.
AR Glass Fibers: Nycon AR (alkali-resistant) glass fibers enhance the lifespan and serviceability of concrete flatwork, precast products, architectural/decorative surfaces, and ornamental cementitious products.
|
|
Green Fibers
·
·
·
Glass Fibers
·
·
Nylon Fibers
·
·
·
·
·
Polypropylene Fibers
·
·
·
·
PVA Fibers
·
·
·
·
·
Steel Fibers
·
·
Structural Fibers
·
·
·
·
·
·
·
|
your profession