[Your Application][Your Profession][Reinforcing Fibers][Other Products]]
 
 
 

NyconSF Type I and Type II fibers are used as secondary/ temperature-shrinkage reinforcement in concrete and shotcrete. Steel fiber dosages for concrete and shotcrete applications can range from 20-120 pounds per cubic yard. Major applications include industrial floor slabs, airport runways, taxiways, aprons, shotcrete tunnel liners, and slope stabilization. Engineering design support is available from Nycon. These products meet the requirements of ASTM A820 Type I or Type II specifications and
ASTM C-1116.

Design:

  • Straight
  • Continuous Deformed
Lengths:
  • 13mm, 19mm, 25mm, 38mm, 50mm lengths

Dosage:

NyconSF dosages as secondary reinforcement-standard practice for most applications:

  • 20-40 lbs/yd3
    		•  Commercial slabs-on-ground
  • 40-85 lbs/yd3
    		•  Light to medium duty industrial and exterior slabs-on-ground and elevated composite decks
  • 85 lbs/yd3
    		•  High-performance applications
  • 85-120 lbs/yd3
    		•  Special applications

    Value/Benefit in Concrete:
    • Provides three-dimensional reinforcement that reduces plastic and hardened concrete shrinkage.
    • Depending on dosage level will increases flexural strength of concrete and can reduce cross-section of slab.
    • Eliminates need for conventional secondary reinforcement.
    • Enhances fatigue strength.

    Back to Top

    		 



    Call To Order
    800 456 9266